HPS + LM3D(Wire Rope/Flat Belt)


rope1

The HPS individual wire rope sensor provides an easy and precise solution for controlling the load in traction lifts,it is used extremely limited headroom.


Features:

  • Automatic calibration using the wire rope diameter,meaning no need for test weights.
  • Quick and easy installation(5 Mins.).
  • Reduced dimensions.
  • For any type of Wire ropes and Flat belts.

Specifications:

  • Supply Voltage                    : 230 VAC
  • Disabling Input                    : 24-230 VAC/DC
  • Relay Contacts                    : 250VAC 3A
  • Operating Capacity(RC)     : 500/1000/5000 kg Sensor
  • Safe Load                             : 150% RC
  • Operating Temperature    : -10Degree Celcius/50Degree Celcius

 


WR + LM3D (Individual Wire Rope Type)


rope2

The WR individual wire rope sensor provides an easy and precise solution for controlling the load in traction lifts by measuring the individual tension on each wire rope.


Features:

  • Automatic calibration using the wire rope diameter,meaning no need for test weights.
  • Quick and easy installation.
  • Reduced dimensions.
  • For any type of Wire ropes and Flat belts.
  • Integrated SW to correct weight increases due to compensating chain.
  • 3 programmable relay output for Presence,Full load & Overload.
  • Display to Visualize the real weight.
  • LM3D Options:
    Analogue output in mA(0-20,0-24 & 4-20).
    Voltage Output(+/- 10VDC)or(+/- 5VDC) or (0-10 VDC)or(0-5 VDC) or (-10/0/+10VDC)
  • Communications available:RS485.
  • Suitable for 1:1,2:1 & 4:1 roped installations.
  • Cabin indicator output.

Specifications:

  • Supply Voltage                    : 230 VAC
  • Disabling Input                    : 24-230 VAC/DC
  • Relay Contacts                    : 250VAC 3A
  • Operating Capacity(RC)     : 1000 kg/Sensor
  • Safe Load                             : 150% RC
  • Operating Temperature    : -10Degree Celcius/50Degree Celcius

 

ILC - CAN(Multi Rope Type)


rope3

This wire ropes load weighing device with an Open-Style connector allows managing the load in an elevator easily and precisely.The unit uses CANopen communications protocol and its calibration and configuration is very easy.


Features:

  • Automatic calibration using the wire rope diameter,meaning no need for test weights.
  • Universal clamps for all types of rope distribution.
  • BUS connection type:DS303-1 connection,open style connector.
  • LED lights indicate the state of the NODE within the network according to DS303-3 standard.

Specifications:

  • Supply Voltage                    : 24 VDC
  • Communications                   : CANopen
  • Relay Contacts                    : 250VAC 3A
  • Operating Capacity(RC)     : 3500 kg
  • Safe Load                             : 150% RC
  • Operating Temperature    : -10Degree Celcius/50Degree Celcius

rope4

LMC-CAN(Universal Control Unit for CAN Open)


The universal LM-CAN control unit can be used with all sensors(i.e. Wire rope,Cabin,Beam and Bedframe) manufactured by MICELECT.This unit uses CANopen communications protocol and its calibration and configuration is very easy.
Other all features same as ILC-CAN.

Elevator Wire Rope Sensors, Excella Electronics, Rope Tension System

Copyright © 2018. Excella Electronics. All Rights Reserved. Designed By All Web Vision