Parellel Communication Controller


Microcontroller Based Controller Designed For Geared & Gearless Elevators


controller

Features:

  • SMD Designed,Microcontroller based control board for all Complex functions.
  • PCBs are soldier in fully Automatic pick & Place robotic machine. Which will remove all errors.
  • OPTO-isolated inputs & outputs(for high reliable operations) with LED indications & available in both 12VDC & 24 VDC.
  • All the input & output are Carrying LED indication on mother board for quick debugging.
  • Call register LED output for car calls & landing calls.
  • Call register LED & call push button are on single wire,which reduce wiring.
  • Flashing target floor register LED.
  • Position & direction indicator in panel to monitor the car movement.
  • 7-segment output is short-circuit protected.In a short circuit case the concerned output is shut down until problem is removed.
  • Two tire speed control logic to avoid over travelling due to failure of floor position sensor.
  • Supports all type of gatelocks.
  • Auto fan operation for energy saving.
  • Auto mode/attendant mode operation.
  • Landing call buzzer output for attendant mode.
  • Fireman operation.
  • ARD possible.
  • 110VAC interlocking safety circuit.
  • Slow L/S,Terminal(direction) L/S & Final L/S facility.

Specifications:

  • Power Supply: 3 Phase,415VAC,50Hz,4 Wire.
  • Controlling: Down Collective/Full Collective & Selective.
  • Speed: Upto 1.0 MPS.
  • Type: Car Top Reeds(3 Reeds)/All Reeds(floor Reeds).
  • Door Operation: Auto Door/Manual Door.
  • Floor: 3 Reeds Type:G + 7 Auto Door & Manual Door
             : All Reeds Type:G + 7 Manual Door & G + 5 Auto Door.

Optional:

  • Landing call buzzer output for attendant mode.
  • Fireman operation.
  • ARD possible.
  • 110VAC interlocking safety circuit.
  • Slow L/S,Terminal(direction) L/S & Final L/S facility.
  •  

Automatic Rescue Device(ARD)


rescue

Features:

  • Very Simple Interface and easy and quick to Install.
  • Microprocessor Based Sinewave Output.
  • Use Sealed Maintainance free(SMF) Battery as per Motor Capacity.
  • ARD Facility V3F Controller,Gearless Motor & Most of Renowned Controller.
  • Cooling System-Naturakl Air Cooling.
  • Suitable for Auto Door & Manual Door Lift.
  • Speeds During Rescue Run 4 to 8Hz.
  • Max. Rescue runs per Day- Approx 7 time.
  • Rescue Operation for Total Power Failure or Single Phasing.
  • Protection & Setting for Under voltage & Over voltage.
  • Automatic Shut down after Complete Rescue Journey & to prevent unnecessary battery usage.
  • Automatic Battery Charging with Float Charger.
  • MCB Protection on DC Path.

Lift Control Panel, Flexible Shaft Coupling, Cross Flow Fan

Copyright © 2018. Excella Electronics. All Rights Reserved. Designed By All Web Vision